Custodia Ssubacquea per Canon Eos 7D
Codice: NI3DC7D
Materiale: Bayer Makrolon trasparente
Profondita max di utilizzo: – 60 metri
Tipo di oblò: rimovibile in ABS
Certificato di garanzia NIMAR e collaudo

Custodia subacquea per Canon Eos 7D completa di oblò con comando zoom per ottica Canon EF 24/105 mm f/4 L I USM e oculare.

Incorporating many of the existing features of our HydroFlex 35-3 DW, the 435 DW is as straight forward, easy to work with, and to operate in the water. The housing is designed around a standard Arri 435 IVS with 400 ft. Arri magazines and the 12 inch viewfinder extension. Cooke, Panavision and Zeiss lenses can be fitted, and the re-designed port system can even accept the Zeiss 10mm lens with its dedicated glass port. Interchangeable flat and dome ports are provided.

Our custom viewfinder eyepiece gives the operator an easy-to-locate, large, bright image. The viewfinder port extends out beyond the back of the housing to give more room to position your mask as close as possible to the viewfinder, allowing more relief area for your regulator, for a very comfortable operating position. Both focus and iris lens controls are located on the camera left side of the front of the housing and can be easily viewed and adjusted by the operator or assistant. The housing can also be configured for the Preston Marine FI&Z hand unit allowing the camera assistant to remotely adjust the camera focus and iris underwater. For magazine and battery changes, the camera can stay attached to the front of the housing without disengaging the lens gearing. or disconnecting the cables to video and the CCU unit.

An internal low light level witness camera and an external 2.5" monitor have been incorporated into the system’s design to enable the assistant to see the lens data from outside the housing. Viewports have been provided for direct reading of the magazine footage counter and the camera’s digital display readout.

On-board Lithium-ion batteries provide power to the camera and can run multiple magazines without changing.

NOTE: Will not accomodate the 435 Extreme with the FEM 2 Radio Module.

Specifications

The Scubacam range of splash bags are completely watertight flexible lightweight camera housings for film cameras. They are designed to operate just above or just below the surface of water or in an environment which is extremely dusty or dirty, and give the camera both water and dirt protection, whilst allowing the operator access to all the camera and lens functions.

Each model of the splash bag is made from high quality material that is moulded to fit snugly around the camera and lens. The units are sealed with specialized watertight zips. All metal parts are either stainless steel or anodised aluminium.

It is important to remember that these housings are not to be considered as being suitable for prolonged continuous use under water, and they are not an inexpensive replacement for more expensive aluminium deep water housings.

Technical Features

The Scubacam range of splash bags are completely watertight flexible lightweight camera housings for film cameras. They are designed to operate just above or just below the surface of water or in an environment which is extremely dusty or dirty, and give the camera both water and dirt protection, whilst allowing the operator access to all the camera and lens functions.

Each model of the splash bag is made from high quality material that is moulded to fit snugly around the camera and lens. The units are sealed with specialized watertight zips. All metal parts are either stainless steel or anodised aluminium.

It is important to remember that these housings are not to be considered as being suitable for prolonged continuous use under water, and they are not an inexpensive replacement for more expensive aluminium deep water housings.

Technical Features

The Scubacam range of splash bags are completely watertight flexible lightweight camera housings for film cameras. They are designed to operate just above or just below the surface of water or in an environment which is extremely dusty or dirty, and give the camera both water and dirt protection, whilst allowing the operator access to all the camera and lens functions.

Each model of the splash bag is made from high quality material that is moulded to fit snugly around the camera and lens. The units are sealed with specialized watertight zips. All metal parts are either stainless steel or anodised aluminium.

It is important to remember that these housings are not to be considered as being suitable for prolonged continuous use under water, and they are not an inexpensive replacement for more expensive aluminium deep water housings.

Technical Features

Litepanels, which revolutionized motion picture and television lighting on land, has teamed with Hollywood-based underwater motion picture specialist HydroFlex®, Inc. to develop a family of next-generation underwater lighting fixtures, the Litepanels SeaSun® Underwater housing series.

Underwater with 1×1, MicroPro

Underwater fixtures are specially made to fit Litepanels 1×1 and MicroPro. Using stock Litepanels, SeaSun encases the fixtures in custom aluminum and plexiglass watertight housings that yield the soft output Litepanels is famous for.

Advantages For Underwater Lighting

When shooting underwater, the cameraperson and crew are working in a three-dimensional water column. Depending on the scene
or the subject, the camera and lighting are usually in constant
motion trying to get the shot. The tools needed to successfully shoot
underwater have to be lightweight and easy to maneuver. The
SeaSun lighting fixtures have been designed to be as close to neutrally buoyant as possible, allowing for easy movement to follow the
action. They are designed to be slightly negative in buoyancy,
small in size and easily handheld underwater.

Less Energy Needed

Litepanels LEDs require less than 1/10th the amount of power as
traditional underwater lighting sources, which allows batteries used
to power the lights to last 10 times longer than old-style underwater
fixtures. For example, using Energizer e2 Lithium Ion AA batteries,
the MicroPro can run over 5 hours. And because LEDs emit almost
no heat at all, the Litepanels SeaSuns can be removed from the
water with the light still turned on.

Litepanels SeaSun fixtures are easily gelled to modify color temperature of the light provided. Precut pieces of gel material can be
carried and applied to the underwater fixture during the dive.

Litepanels SeaSun Housing for 1×1 Bi-Color & Bi-Focus

Dimensions: 13” x 13” x 4” (33.02 cm x 33.02 cm x 10.16 cm)
Depth Rating: 100’

Litepanels SeaSun Housing for 1×1 Standard

Dimensions: 13” x 13” x 4” (33.02 cm x 33.02 cm x 10.16 cm)
Depth Rating: 100’

Litepanels SeaSun Housing for MicroPro

Dimensions: 6.5” x 5.25” x 3.5” (16.51 cm x 13.33 cm x 8.89 cm)
Depth Rating: 100’

Advantages

1. Portable
2. No cables to the surface
3. Slightly negative buoyancy
4. Easily handheld
5. Modular for various underwater lighting combinations

Underwater light equipment

• Hidropar 1.2 k hmi w/flicker free ballast
• Hidropar 2 k incandescent w/50’ cable
• Hidropar 1 k incandescent w/50’ cable

Submersible HydroPar® underwater lighting systems set new standards for feature and commercial film production. Modular components, underwater mateable connectors and integrated ground fault sensors (GFCI’s) which prevent electrical accidents, make these lighting systems safe, flexible and easy to set up. Each lamp is compact and lightweight and can be configured to various shooting situations. Barn doors and specially designed snoots are readily used by removing the lamp head retainer ring and inserting the accessory. Filters, gels and scrims may also be used. HydroPars mate to a 5/8" spud for compatibility with standard grip and lighting equipment.

Designed in response to the increasing demands of the industry, the HydroPar 2K incandescent offers a safe and more powerful tungsten lamp. Changing fresnels to adjust the light’s beam pattern is quick and easy. The 2K features HydroFlex’s custom underwater mateable connectors incorporating the “Mate First/Break Last” grounding circuit. Powered by AC or DC, the HydroPar 2K is supplied with a GFCI when using AC current or the appropriate adapter for DC current. The HydroPar 2K is for underwater use only.

Specifications

Diffusion Lenses

The HydroPar® 1K is designed for feature and commercial film production. Modular components, underwater mateable connectors and integrated ground fault sensors (GFCI’s) for accident prevention make HydroPars safe, flexible and easy to set up. Each lamp is compact and lightweight and can be configured to a multitude of shooting situations. Barn doors and specially designed snoots are readily added by simply removing the lamp head retaining ring and inserting the accessory. Filters, gels and scrims may also be used. A 5/8" spud assures compatibility with standard grip and lighting equipment.

Depth rated to 100 ft., the HydroPar 1K was designed primarily as a simple, lightweight multipurpose underwater light source, suitable for key or fill light from a fixed position, or handheld to follow the action. It is for underwater use only.

The HydroPar 1000W achieves its high output by using interchangeable Par 64 series quartz globes. Various beam widths are easily obtained by simply switching globes. This lamp utilizes our custom underwater mateable connector incorporating the “Mate First/Break Last” grounding circuit. Powered by AC or DC, the HydroPar 1000W is supplied with a GFI unit for AC or the adapter for DC.

The HydroPar 1000W conforms to UL 1573 and CE Standards and is certified to CAN/CSA Standard C22.2 NO. 166.

BULB OPTIONS: